The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
Rigid Industries LED Lighting Your Source for Side by Side, Brightest, Most Efficient LED Light Period
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
Easy Two Wire Installation
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
Why LED?
A light-emitting-diode (LED) is a semiconductor diode that emits light when an electrical current is applied in the forward direction of the device, as in the simple LED circuit. The effect is a form of electroluminescence where incoherent and narrow-spectrum light is emitted from the P-N junction in a solid state material.
Advantages of LED lighting:
50,000 hour life expectancy
Very High Lumens per Watt
No glass lens to break
No Bulbs to Burn out
No Ballast to Mount
Rigid Industries Advantage, it's all in the reflector.
Patented Super Efficient Reflector
93% efficient vs. 72% "Brand X" reflectors
Available in both Pencil and Flood Beam
More Light with Less Power, Heat and size.
Much Father Projection
Multi Source Light
No "bouncing" beams
Virtually eliminates HID vibration
If one LED fails the other LEDs will not
Greatly Reduces eye fatigue
10" "E" Series LED Light Bar Spot or Flood Pattern
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
20 LED's with 50,000+ Hour Life Span
Easy Two Wire Installation
3.17 Amps
38.04 watts
3200 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
Dimensions:
3.375" High
3.625" Deep
10" Wide
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
20" "E" Series LED Light Bar
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
20 LED's with 50,000+ Hour Life Span
Easy Two Wire Installation
6.33 Amps
75.96 watts
6400 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
6" of flood reflectors on the outsides of the light and 14" of spot reflectors on the inside half of the light.
This will optimize both functional light spread and light distance for increased visability.
Dimensions:
3.375" High
3.625" Deep
20" Wide
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
30" "E" Series LED Light Bar
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
20 LED's with 50,000+ Hour Life Span
Easy Two Wire Installation
9.5 Amps
114 watts
10,925 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
8" of flood reflectors on the outsides of the light and 22" of spot reflectors on the inside half of the light.
This will optimize both functional light spread and light distance for increased visibility.
Dimensions:
3.375" High
3.625" Deep
30" Wide
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
$884.99
40" "E" Series LED Light Bar
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
20 LED's with 50,000+ Hour Life Span
Easy Two Wire Installation
12.67 Amps
152.04 watts
14,525 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
8" of flood reflectors on the outsides of the light and 32" of spot reflectors on the inside half of the light.
This will optimize both functional light spread and light distance for increased visability.
Dimensions:
3.375" High
3.625" Deep
40" Wide
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
$1084.99
50" "E" Series LED Light Bar
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
100 LED's with 50,000+ Hour Life Span
Easy Two Wire Installation
15.83 Amps
190 watts
14,525 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
24" of flood reflectors on the outsides of the light and 26" of spot reflectors on the inside half of the light.
This will optimize both functional light spread and light distance for increased visability.
Dimensions:
3.375" High
3.625" Deep
50" Wide
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
$1289.99
Billet Dome LIght
Billet Dome light. All come in Black Annodized. Also includes the hardware necessary to mount the light. The LED Board runs on 1.4 watts and will last the life of your vehicle.
"E" Series LED Light Bar Polaris Ranger Mount
Ranger Front Grill Insert for our "E" Series 10" LED Light Bar.
Powdercoated Textured Black to match stock Bumper.
$79.99
LED Light Bar Wiring Harness with Switch & Relay
$38.99
35W RZR HID Conversion Kit.
Polaris RZR stock location HID.
This kit comes with everything needed to install HID lights in the stock headlights on a RZR and 2008 Ranger.
As with all conversion kits we sell, these are plug and play.
No cutting or soldering required, takes about 10 minutes to install.
35w HID kit, that only pulls 10w more per set, but gives almost 3x the light of the stock bulbs.
Everything is included with this kit. includes everything needed: 2 lights, 2 ballasts, brackets, relayed wiring harness,
$138.99
35W Ranger HID Conversion Kit.
This kit comes with everything needed to install HID lights in the stock headlights on a Ranger.
No cutting or soldering required, takes about 10 minutes to install.
35w HID kit, that only pulls 10w more per set, but gives almost 3x the light of the stock bulbs.
Everything is included with this kit. includes everything needed: 2 lights, 2 ballasts, brackets, relayed wiring harness,
$138.99
35W Rhino HID Conversion Kit.
Our kits come with everything you will need to light up the night.
Unlike other kits on the market, you don't have to buy a relayed wiring harness or wait for the dealer to order headlight cups.
Everything is included with this kit. includes everything needed: 2 lights, 2 ballasts, brackets, relayed wiring harness, headlight cups(if needed).
Here is one more feature that makes our lights the best value on the market. A plug and play relay wiring harness. Most companies say that you can plug directly into the stock wiring. It will work about 60% of the time, then you randomly lose one light or the other. Then they can sell you a harness for $40, ours are included, for 100% reliability.
Please click below for a bulb comparison on the different year Rhino's
Bulb comparison chart
Application Chart for Other Yamaha Quads
Use Model Year Rhino 2004-2005 for the following Quads
Bruin 350 2004-05, Kodiak 2003, Big Bear400 2003-05, Kodiak450 2002-05, Use Model Year Rhino 2006 for the following Quads, Bruin 350 2006, Big Bear400 2006, Kodiak400/450 2006, Grizzly 450 2006
Use Model Year 2008 for the following Quads
Grizzly125 2004-2008, BigBear400 2007-08, Raptor250 2008, Grizzly350 2007-2008, Wolverine 2005-08, Big Bear 2007-08, Grizzly660 2003-07, Raptor660 2001-2006, Raptor700 2006-09, Rhino450 2007-09
*****All of the quad applications are direct plug and play. NO CUTTING OR SOLDERING******
$138.99
35W Artic Cat Prowler HID Conversion Kit.
These kits include everything thats needed to install 1 set of HID lights on any year Prowler. If you want 2x the light, the stock system will run 2 sets no problem.
Arctic Cat did everyone a favor by using 2 bulbs per side. That means you get to keep your low beams for driving on the road or as a camp light.
These kits are all plug and play, they take about 10 minutes to install.
They draw only 5w more per side, and give you almost 3x the light.
$138.99
35W Teryx HID Conversion Kit.
This is a plug and play Teryx HID single 35W 6000K Kit
This kit comes with everything needed to install HID lights in the stock headlights on a Teryx.
35w HID kit, that only pulls 10w more per set, but gives almost 3x the light of the stock bulbs.
Everything is included with this kit.
$138.99
35W Teryx HID HI/LO using Halogen Low Beam Conversion Kit.
This is a plug and play Teryx HID kit with Halogen and HID!!!!!
Thats right, if you want you keep your low beam and get all the advantages of an HID high beam.
Everything is included with this kit.
$174.99
Ballast mounting plate for 07 and up Rhino's
Powder coated ballast mounting plate for 2007 and up Yamaha Rhinos. Mounts inbetween radiator supports for a easy location to mount ballast for either bumper lights or OEM replacement lights. Includes self tapping sheet metal screws for ease of mounting.
$9.99
HID 36" extension wires
Wires to extend the distance between the ballast and the bulb 36".
Ideal for the Polaris Ranger.
$24.99
AC RACING Dual 10" Series Light Mount for Motorcycles
This great set up from AC Racing was featured in Dirt Sports Magazine and is the hottest ticket right now in the motorcycle industry for lighting. Bolts right on most motorcycles and only uses 6.3 amps.
Take it from Brad Goolsby winner of the Glen Helen 24 hour.
This is for mount only!
$258.99
RV LED RetroFit Kit.(single)
This new LED product is a direct plug in replacement LED light.
It is an extremely efficient and bright LED RV interior light.
-Only 3 watts compared to an 18W halogen.
-Just as bright as the halogen.
-3 year warranty-unlimited use.
-Includes 1141/1156 and 3156 adapters.
-Almost NO heat produced compared to the Halogen bulbs.
Each light has included battery pack and switch for stand alone operation.
LED COMPARISON TO HALOGEN
Halogen Rigid RV LED Other"Bright" LED
watts 18 3 3
Lumens 284 270 120
Life 1000h 20,000h 20,000h
Cost $3 $29.99 $21.99
Warranty none 3yr 30day
This is a true warm white and projects the same color light as the Halogen.
$24.99
"E" Series LED Light Bar 3 Piece Clamp System
for Roll Bars & Tubing
These clamps allow you to Mount Your E Series LED Light at any angle and with our numerous clamp sizes you are bound to have the perfect Clamp set up.
When ordering please specify which size tubing you are looking for.
LED 1156 Bulb 24 LED's
1156 LED Bulb with 24 LED's. Ideal for whips, motorcycle marking lights, and other automotive applications. Please specify color. Comes in Red, Blue, Green, White, and Yellow. 360 degree coverage.
LED 1156 Bulb 36 LED's
1156 LED Bulb with 36 LED's. Ideal for whips, motorcycle marking lights, and other automotive applications. Please specify color. Comes in Red, Blue, Green, White, and Yellow. 360 degree coverage.
4" "E" Series LED Light Bar
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
50,000+ Hour Life Span
Easy Two Wire Installation
.95Amps
12.4 watts
1260 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
Dimensions:
3.375" High
3.625" Deep
5 3/8" Long
6" "E" Series LED Light Bar
The new "E" Series High Intensity L.E.D. Light by Rigid Industries.
General Specs:
93% Optical Efficiency
Shockproof
No Vibration
Fully Dimmable
12 LED's with 50,000+ Hour Life Span
Easy Two Wire Installation
1.97 Amps
22.8 watts
1920 Lumens
Patented Hybrid Technology runs lights at 90% efficiency which is unmatched in the industry.
Dimensions:
3.375" High
3.625" Deep
7 3/8" Long
When Purchasing this LED Light bar you may need one of the following mounts!
2" Roll Bar Mount
1.75" Roll Bar Mount
1.5" Roll Bar Mount
1.25" Roll Bar Mount
Polaris Ranger 04 to 08 Mount
"U" Cradle for LED Light Bars.
Our U shaped cradles offer another way to mount your Rigid Industries LED Light Bars. We carry sizes from 4" up to 20". Hardware included. This set up gives you another mounting option for the brightest most efficient lights on the market.
